4 AP3/10, AP3/15 Installation Instructions
Specification
Product: Zip Aquapoint III
Type: Direct unvented multipoint
Capacity: 10 litre, 15 litre
Loading: 2.0kW
Thermostat: Adjustable 7ºC to 75ºC
Thermal cut-out: Manually re-settable set to 85+/-3ºC
Water vessel: Glass enamelled steel tested to 12 bar. Maximum working
pressure 6 bar
Safety Features: Expansion relief valve set to 6 bar (supplied)
Manually re-settable over temperature safety cut-out
Provision to fit Pressure and Temperature relief valve
(available as an optional accessory)
Sacrificial anode to provide added protection for vessel and
element in aggressive water areas.
Approvals: Zip Aquapoint III complies with LVD and EMC directives is
CE endorsed and WRAS approved showing that it complies
with the Water Fittings Regulations in England & Wales, the
Water Byelaws 2000 in Scotland and the Water Regulations
in Northern Ireland.
Models: 10 litre AP3/10
15 litre AP3/15
Performance: Model Heat up time Re-heat time
(15° to 65ºC) (70% vol.)
AP3/10 18 mins 12 mins
AP3/15 32 mins 18 mins
To Next Page
Loading...
Need help?
General
