6. Reset counters
Resetting the entry / exit passing counter.
7. System initialization
After successful initialization, the panel parameters will be restored to the factory setting and the
entry / exit passing counter will be reset.
8. Device number
Press "UP" and "DOWN" buttons to adjust values. Press "OK" button to save.
When plural devices are placed together, different device number can be used to distinguish,
the default number is 1.
9. Device information
The basic information of the display panel includes type and version etc.
10. Auto test
Repeated left and right switches, it is mainly used to test the stability of the control board and the
ageing of device.
To Next Page
Loading...
