US922 USER GUIDE | 2016
12
Each time you press the
asterisk key on the
keypad, you have the
choice to enter either “let-
ters” or “symbols.” When in
“letter mode” [ EN ] (English)
will appear at the bottom of
the screen.
Press the asterisk
again and [symbol] will re-
place [ EN ] (English) at the
bottom of the screen. When
in “symbol mode,” press the right scroll key to access more symbols.
How to create a
User’s Name
The following example
illustrates how to create the
username Joe.
Step 1
From within the New User
menu, press the aster-
isk key until [ EN ]
(English) appears at the
bottom of the screen. You
are now ready to begin entering “letters.”
Step 2
Press the
key once.
Notice there are 6 choices:
0j 1k 2l 3J 4K 5L
To enter the username Joe, press the 3 key to create an uppercase letter “J .”
After entering the desired “letter,” the display will return to the [English] prompt.
Step 3
Press the
key once to continue entering the username Joe.
Again there are 6 choices:
0m 1n 2o 3M 4N 5O
To continue entering the username Joe, press the 2 key to create a lowercase “o.”
After entering the desired “letter,” the display will return to the [English] prompt.
Step 4
Now press the
key once to continue entering the username Joe
Again, notice there are 6 choices:
0d 1e 2f 3D 4E 5F
Finish entering the username Joe by pressing the 1 key once to create a lowercase
“e .”
You’ve now completed entering the user’s name and are ready to enter “Joe’s” n-
gerprint(s) and/or password and authority setting.
To Next Page
Loading...
Need help?
General
