ZKTeco SpeedFace Series User Manual

103
5. Tap on the [Save] key and the alarm will be successfully added. The alarm will be enabled by default.
6. Enable [Alarm Switch] to change the alarm's status. Green indicates that the alarm is on, while gray indicates that
the alarm is off.

ZKTeco SpeedFace Series Specifications

General

Operating Temperature	0°C to 45°C
Operating Humidity	20% to 80%
Communication	TCP/IP, USB Host
Power Supply	12V DC
Face Capacity	Up to 6, 000 faces (depending on the specific model in the series)
Display	Touch screen (size varies depending on the specific model)
Dimensions	Varies depending on the specific model
Weight	Varies depending on the specific model