ZKTeco SpeedFace Series User Manual

2
1.2 Startup Screen
After plugging in the device, press the On/Off switch located on the side. The following screen will load:
Notes:
 The wallpaper can be customized. For more details, please refer to “1.4 Change Theme and Wallpaper”.
 Tap on to enter the personnel ID Input screen in 1:1 verification mode. For further information
about the 1:1 verification process, see section “1.5 Verification Method”.
 Tap on to enter the main menu. If a super administrator has already been registered for this device,
you will need the permission of the super administrator to enter the main menu.

ZKTeco SpeedFace Series Specifications

General

Operating Temperature	0°C to 45°C
Operating Humidity	20% to 80%
Communication	TCP/IP, USB Host
Power Supply	12V DC
Face Capacity	Up to 6, 000 faces (depending on the specific model in the series)
Display	Touch screen (size varies depending on the specific model)
Dimensions	Varies depending on the specific model
Weight	Varies depending on the specific model