ZKTeco SpeedFace Series User Manual

136
10.3.5 Validity Period of User Information
This is used to determine if employee validity periods are enabled or disabled when registering employees.
1. Tap on the [User period of validity end setting] switch. It will turn green when enabled and gray when disabled.
2. When User period of validity end setting is enabled, the following will display. Select the setting you would like
to configure.

ZKTeco SpeedFace Series Specifications

General

Operating Temperature	0°C to 45°C
Operating Humidity	20% to 80%
Communication	TCP/IP, USB Host
Power Supply	12V DC
Face Capacity	Up to 6, 000 faces (depending on the specific model in the series)
Display	Touch screen (size varies depending on the specific model)
Dimensions	Varies depending on the specific model
Weight	Varies depending on the specific model