ZKTeco SpeedFace Series User Manual

15
1.5.2 Fingerprint Verification
 1:N fingerprint verification
Compare the fingerprint that is being pressed onto the fingerprint reader with all of the fingerprint data that is stored in the
device.
To enter fingerprint verification mode, simply press your finger on the fingerprint reader.
Make sure that you correctly press your fingerprint onto the fingerprint reader. Please refer to section “1.1 Using
your finger” for further details.
Successful verification:

ZKTeco SpeedFace Series Specifications

General

Operating Temperature	0°C to 45°C
Operating Humidity	20% to 80%
Communication	TCP/IP, USB Host
Power Supply	12V DC
Face Capacity	Up to 6, 000 faces (depending on the specific model in the series)
Display	Touch screen (size varies depending on the specific model)
Dimensions	Varies depending on the specific model
Weight	Varies depending on the specific model