ZKTeco SpeedFace Series User Manual

135
Menu Options Function Description
Verify display user
photo
If it is enabled, the employee photo will be displayed; if not, the employee photo will not
be displayed.
Remaining
attendance Log Alert
When the remaining record space reaches a set value, the device will automatically display
a remaining record memory warning. When the value is set as 0, the function is disabled.
Cyclically Delete ATT
Data
When the attendance record memory has reached full capacity, the device will
automatically delete a set value of old attendance records. When the value is set as 0, the
function is disabled.
Cyclically Delete ATT
Photo
When the space storing the attendance photos have reached full capacity, the device will
automatically delete a set value of old attendance photos. When the value is set as 0, the
function is disabled.
Cyclically Delete
Blacklist Photo
When the space storing blacklisted photos have reached full capacity, the device will
automatically delete a set value of old blacklisted photos. When the value is set as 0, the
function is disabled.
Verify Message
Display Delay
This is the length of time that an employee’s information will display on the system's
screen after successful verification. Unit: seconds.
Face verification
interval
To set the facial template matching time interval as needed. Valid value: 0~9 seconds.

ZKTeco SpeedFace Series Specifications

General

Operating Temperature	0°C to 45°C
Operating Humidity	20% to 80%
Communication	TCP/IP, USB Host
Power Supply	12V DC
Face Capacity	Up to 6, 000 faces (depending on the specific model in the series)
Display	Touch screen (size varies depending on the specific model)
Dimensions	Varies depending on the specific model
Weight	Varies depending on the specific model