ZKTeco SpeedFace Series User Manual

113
Menu Options Function Description
Enable Ethernet
Switch
Enable to modify the Ethernet network address parameters. If this is not enabled,
users cannot modify the Ethernet network address parameters.
DHCP
Enable DHCP to assign an IP address to the internal network or network service
provider.
IP Address
The default IP is 0.0.0.0; Changeable; IP address of the device and the PC are
connecting to the same network segment.
Subnet Mask
The default subnet mask is 0.0.0.0 (can be changed).
Gateway Address
The default gateway address is 0.0.0.0 (can be changed).
DNS
The default address is 0.0.0.0 (can be changed).
TCP COMM Port
The default TCP port is 4370 (can be changed).
When the device is connected to the network after setting the above parameters, the following page will display:
The connection succeeds, with status displayed on the icon bar.

ZKTeco SpeedFace Series Specifications

General

Operating Temperature	0°C to 45°C
Operating Humidity	20% to 80%
Communication	TCP/IP, USB Host
Power Supply	12V DC
Face Capacity	Up to 6, 000 faces (depending on the specific model in the series)
Display	Touch screen (size varies depending on the specific model)
Dimensions	Varies depending on the specific model
Weight	Varies depending on the specific model