picture5 webLogin Page
There is no password initially, just click to log in, and you will enter the configuration page after logging in:
picture6 webConfiguration Page
Click Network -> Interface, and you can see the existing interfaces of the device, mainly LAN port, WAN port, and WAN_4G port. WAN port is mainly used to
provide users with external network access services, while LAN port is mainly used to provide users with local area network access or output interface. Specifically,
through the WAN port, the router can receive data packets from the Internet and forward them to the devices in the local area network; through the LAN port, the
router can receive data packets from the Internet and forward them to the devices in the local area network.
6
To Next Page
Loading...