ZMC420SCAN Motion Controller
2.2.1
Power interface:
Pin
number
name Explanation
1
E + 24V External power
supply 24V input
2
EGND External power
ground
3
FG /
EARTH
Safety ground /
shield
ZMC420SCAN series controllers are powered by a single power supply, and ZMC0-2
series and ZIO expansion cards are powered by dual power supplies.
5V shaft and encoder interface use internal power supply, IO uses external
power supply; ZIO expansion module extended shaft and encoder use external
power supply.
2.2.2
Communication Interface:
Pin
number
name Explanation
1
485B 485-
2
485A 485+
To Next Page
Loading...
Need help?
General