How to fix a water leak between the motor and pump body of Zodiac Swimming Pool Pump?
If there's a water leak between the motor and the pump body of your Zodiac Swimming Pool Pump, the mechanical lining may be damaged or defective. Consider replacing the mechanical lining.
What to do if automatic verification fails on Zodiac Swimming Pool Pump?
If at least one of the automatic tests failed on start-up or during operation of your Zodiac Swimming Pool Pump, break the pump circuit then reconnect it to reset it.
What happens when there is network overvoltage in Zodiac Swimming Pool Pump?
When the voltage exceeds 269VCA in your Zodiac Swimming Pool Pump, the interface will reset when the voltage returns to a normal value.
What happens when there is network sub-voltage in Zodiac Swimming Pool Pump?
When the network voltage falls below 180VCA in your Zodiac Swimming Pool Pump, the interface will reset when the voltage rises over 209VCA again for at least 6 seconds.
What to do if the Zodiac Swimming Pool Pump displays a temperature error?
If your Zodiac Swimming Pool Pump shows a temperature error because the motor temperature is too high (+100°C) or too low (-20°C), wait until normal temperature conditions return and then restart the pump.
Covers safe installation practices, user qualifications, operational procedures, and child safety.
Details electrical safety, chemical compatibility, battery handling, weather protection, and environmental considerations.
Outlines advice on handling malfunctions, repair responsibilities, and conditions that may void the warranty.
Identifies and illustrates the main parts of the FloPro™ e3 pump for user reference.
Provides key technical specifications including voltage, power, flow rates, pressure, and connections.
Displays physical dimensions, weight, and important marking information for the appliance.
Presents graphical data illustrating the pump's flow rate versus head pressure at different speeds.
Guidelines for choosing an appropriate and safe location for pump installation.
Procedures and recommendations for connecting the pump to the pool's hydraulic system.
Instructions and safety precautions for connecting the pump to the electrical power supply.
Explains the pump's function and how to interpret its user interface symbols and indicators.
Step-by-step guidance for starting, running, and stopping the pump during normal use.
Details on how to use additional features like speed adjustment, pump reset, and shutdown.
Steps to protect the pump from frost and extended disconnection during winter periods.
Recommendations and tasks for regular maintenance, distinguishing between user and technician responsibilities.
Lists common problems, their possible causes, and recommended checks for resolution.
Explains error codes indicated by the pump's interface and provides corresponding solutions.
General| Weight | 12.5 kg |
|---|---|
| Power Source | Electric |
| Dimensions | 635 x 260 x 331 mm |
| Horsepower | 1.5 HP |
| Pipe Size | 1.5 inches |
To Next Page
