Zodiac MX.6 - Troubleshooting: Cleaner getting stuck at steps; Troubleshooting: Cleaner climbing behavior (too much or not enough)

15
SECTION 5 – TROUBLESHOOTING
PROBLEM SOLUTIONS
Your MX
™
6
gets stuck at steps.
Observe cleaner for more than ve (5) minutes and ensure that
each drive track is periodically reversing direction. If it is not,
contact your dealer or service center for help.
Ensure the swivel on top of the cleaner rotates freely.
Check Cleaner flow to verify proper ow. (pg 9)
Conrm proper hose length. Shorten if necessary. (pg 7)
Your MX
™
6 won’t climb walls. Increase flow to Setting 3 on the Auto Weir Valve. (pg 10)
Your MX
™
6 climbs too much Reduce the flow on the Auto Weir Valve to setting 1. (pg 10)
For additional assistance, contact our Customer Care Helpline on
0860 ZODIAC (0860 963 422)