Zodiac MX.6 - SECTION 5 - TROUBLESHOOTING; Troubleshooting: Cleaner movement issues (slow or no movement); Troubleshooting: Poor pool coverage

14
SECTION 5 – TROUBLESHOOTING
PROBLEM SOLUTIONS
Your MX
™
6 does not move
or moves slowly.
Check Cleaner flow to verify proper ow (pg 9).
Check for debris jammed in engine (pg 12).
Backwash filter and empty pump basket.
Check for air in system. If the water level in pump basket drops
or you see excessive air bubbles in the pump basket or coming
from the return lines, there is air in the system. Check hose
connections, tighten all fittings at pump and check o-ring at
pump basket for wear.
Your MX
™
6 coverage is poor.
For example, the cleaner does
not reach parts of the pool
and leaves large uncleaned
patches.
Check Cleaner flow to verify proper ow (pg 9).
Ensure return jets are directed down. Add a return diverter if
necessary. (see optional accessories)
Make sure hose is not kinked or coiled.
Conrm proper hose length. (pg 7)
Observe cleaner for more than ve (5) minutes and ensure that
each drive track is periodically reversing. If it is not, contact your
dealer or service center for help.