Zodiac pH Perfect - Identification of Parts; Included System Components

Identification of Parts
The pack contains the items shown and required to install your pH Perfect
Polyethylene
inlet tube
(5 metres)
Electrode
pH Model SPH - 1
pH electrode with
6 metre cable
FPM lipped
injection flap
valve (3/8”)
Injection
flap valve
reducer
Collar for fixing
PSS3 to DN
50mm pipe
Collar for fixing
the injection valve to
DN 50mm pipe
pH Perfect
controller
Intake pipe with 2 metre PVC tube
+ 3 metre cable + 15cm extension
(with connector) for 20 litre can
Wall bracket
2 fixing bolts
and screws
(ø = 6mm)
Model PSS3 (1/2”)
sensor holder
Buffer solution kit
pH 4, pH 7,
H2O (water)