Zodiac pH Perfect - INTERNAL TECHNICAL SETTINGS; Adjusting the Set Point; Selecting Dosing Product

Set Point
Adjust the set point by turning the potentiometer to the desired value using a flat-head screwdriver.
Press the “Read Set” key to adjust the setting. Setting is done in steps of 0.2 pH.
Choice of Dosing Product
The choice of an acid or alkaline dose is made with the JP7 jumper link to permit pH MINUS (acid)
dosing.
JP7 Status Product
pH MINUS (Acid)
pH PLUS (Alkaline)
INTERNAL TECHNICAL SETTINGS