Cable Modem Connection Kit which has an excellent splitter and 2
coaxial cables packaged together at a reasonable price. You can also
purchase splitters and coaxial cable separately if you prefer to do that,
perhaps because you need a special length of coaxial cable.
2 Connect the supplied Ethernet cable between any cable modem LAN jack and a
computer’s Ethernet jack. We recommend that you do this even if you later plan
to disconnect this computer. If connecting the Ethernet cable to a computer is
difficult or impossible, you can make a wireless connection as discussed below
in
Connecting your Cable Modem/Router wirelessly to some device.
3 Connect the Zoom power cube between the Zoom cable modem and a live
power jack.
4 What you do next depends on your cable modem company. Typically you can
call your cable modem company’s support department and tell them your cable
modem is hooked up. They’ll normally ask for the information mentioned above
in
Before installing your cable modem please read this. Some cable companies
also let you just open the browser on a computer that’s connected to the Zoom
cable modem. A setup page comes up automatically, and you follow the
instructions.
5 Go to Now that your cable modem is connected, do this below.
10
To Next Page
Loading...
