Changing effect types
Selecting effect types
1.
Press or .
�
Function Operation
Change to the previous effect type
Press
Change to the next effect type
Press
Selecting effect categories
1.
While pressing , press .
The category name appears on the display.
Press
again to show the next category name.
�
After the category name has been shown for a moment, the effect will change to the rst effect in the
category.
HINT
• While pressing
, press to show the previous category name.
• See Guitar Lab for the explanations of each effect.
NOTE
In the following cases, “PROCESS OVERFLOW” will appear and the effect will be bypassed. Bypassing
can be ended by deleting some effects or changing their types.
• When the processing power limit is exceeded
• When trying to use 3 or more effects that have 5 or more parameters
HINT
Select effects in the PEDAL category on the to use effects that can be controlled by the expres-
sion pedal.
22
To Next Page
Loading...
