Zoom A1X FOUR - Setting the BANK HOLD Function

Setting the BANK HOLD function
This function can be used to limit to the same bank when switching patch memories.
1.
Press .
This opens the SETTING screen.
2.
Press .
This opens the SETUP screen.
3.
Turn .
When BANK HOLD is ON
Switching down from the lowest patch memory in a bank will open the highest patch memory in the
same bank. Switching up from the highest patch memory in a bank will open the lowest patch memo-
ry in the same bank.
Example: current patch memory in Bank 1
When BANK HOLD is OFF
Switching down from the lowest patch memory in a bank and up from the highest patch memory in a
bank will open a patch memory in the next bank.
Example: current patch memory in Bank 1
36