Zoom A1X FOUR - Setting the AUTO SAVE Function

Setting the AUTO SAVE function
This function can be used to automatically save changes to patch memory and effect settings when they
are made.
1.
Press .
This opens the SETTING screen.
2.
Press .
This opens the SETUP screen.
3.
Turn .
Setting Explanation
ON Automatic saving is enabled.
OFF Automatic saving is disabled.
When AUTO SAVE is ON
Patch memory and effect setting changes will be saved automatically.
When AUTO SAVE is OFF
Patch memory changes can be saved with the following procedure.
1.
After editing a patch memory, switch to a different patch.
A message conrming that you want to save the changes will appear on the display.
30