Operation Guide 1
Selecting Patches for Playing
8
ZOOM GFX-4
In the factory default condition, the memory of the GFX-4 contains 60 rewritable user patches and 60 read-only preset
patches. This section shows you how to select patches while playing your instrument. Try it out for yourself, to see what
the GFX-4 can do.
Operation Guide
1
2
3
The GFX-4 automatically goes into program
mode. In this mode, the display and the
GROUP/BANK indicator show the following
information.
Turn on the power
Turn power on in the order GFX-4 ➝
amp/playback system.
Select the patch
To switch patches within the same
bank, simply press one of the foot
switches 1 - 3 whose LED is not
currently lit.
In program mode, foot
switches 1 - 3 serve for
patch switching.
The LED of the foot switch
corresponding to the
current patch is lit.
Group
Bank
Patch name
Lit when user
patchis selected
Lit when preset patch
is selected
Lit
When the GFX-4 is in manual mode
(MANUAL key LED lit), foot switches 1 - 3
turn the various modules on and off.
Select the bank
To choose a patch from a
different bank, use the
BANK foot switch to
select the bank and then
use foot switches 1 - 3 to
select the patch.
To Next Page
Loading...
