Need help?Do you have a question about the Zoom LiveTrak L-20 Control and is the answer not in the manual?
General| Brand | Zoom |
|---|---|
| Model | LiveTrak L-20 Control |
| Category | DJ Equipment |
| Language | English |
Legal information regarding trademarks, registered properties, and licensing.
Details new features introduced in L-20 Control Version 2.0, including multi-iPad control.
Step-by-step guide on how to download and install the L-20 Control application from the App Store.
Instructions for establishing a Bluetooth connection between the iPad and the L-20/L-20R.
Identifies and describes the primary sections of the L-20 Control application interface.
Explains how to switch between different operational views within the application.
Overview of the visual elements and controls for each input channel.
Detailed controls for editing channel parameters like name, color, EQ, and effects.
Details on selecting and adjusting parameters for audio effects.
Functionality for adjusting the tone of the Master Out using a 15-band graphic equalizer.
Key controls including transport, scene management, and monitor outputs.
Interface for managing projects, navigation, and recording status.
Guide to adjusting input channel levels, pan, and send effects.
How to slide control knobs to adjust parameters like EQ Mid Frequency.
Procedure to select and assign a color to an input channel for visual identification.
Instructions for renaming input channels using the on-screen keyboard.
How to reset all channel strip parameters back to their default values.
Steps to assign and adjust send levels for effects on a specific channel.
Process for selecting different effects and modifying their specific controls.
How to turn on and manipulate the graphic EQ faders for master output tone.
Initial setup for recording, including physical connections and resolution.
Steps to enable channels, set levels, and start recording using the app.
Instructions for enabling channels for playback and initiating playback.
Steps to save the current mixer settings as a scene for later recall.
Procedure to load and apply previously saved mixer scene configurations.
How to select and adjust levels for monitor outputs A through F.
Instructions for copying mix settings from one output to another.
Guide to setting up and connecting up to seven iPads to control the L-20/L-20R.
Steps to launch L-20 Control on a remote iPad and connect it to the hub device.
Notes on which functions are controllable from a remote device.
To Next Page
