Zoom MS-70CDR+ - Specialty and Modulated Delays

10 11
AC TAPE
ECHO
This tape echo sound has been tailored for acoustic instruments.
TIME Set the delay time. 1 - 1000
MODE
Sets the delay time range.
When metronome is chosen, the delay time is synchronized to the tempo.
Short,
Long,
REPEAT Adjusts the number of repeats. 0 - 100
MIX Adjust the amount of effect sound mixed with the original sound. 0 - 100
TAIL
When ON, the effect sound is sustained even if the effect itself is turned off. When OFF, the
effect sound also stops when the effect is turned off.
OFF, ON
DUAL
DELAY
This effect combines 2 delays and is based on the Eventide TimeFactor DigitalDelay.
TIMEA Adjusts the delay time of Delay A. 0 - 1490
TIMEB Adjusts the delay time of Delay B. 0 - 1490
MODE
Sets the delay time range.
When metronome is chosen, the delay time is synchronized to the tempo.
TIME,
BAL Adjusts the balance between original and effect sounds. 0 - 100
REP A Adjusts the number of Delay A repeats. 0 - 110
REP B Adjusts the number of Delay B repeats. 0 - 110
DLYMX Adjust the mix of the Delay A and B effect sounds. 0 - 100
FLTR Adjusts the tone. -100 - 100
DEPTH Sets the depth of the modulation. Also sets the output to mono (M0.M50) or stereo (S0.S50).
MN-0 -
ST-50
SPEED Sets modulation speed. 0 - 50
MULTI
TAP DELAY
This effect produces several delay sounds with different delay times.
TIME Sets the delay time. 1 - 3000
MODE
Sets the delay time range. When metronome is chosen, the delay time is synchronized to the
tempo.
Short,
Long,
PTTRN Sets the tap pattern, which varies from rhythmical to random patterns. 1 - 8
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 - 100
TONE Adjusts the tone. 0 - 10
VOL Adjusts the volume. 0 - 100
TAIL
When ON, effect sound continues even after effect is turned off. When OFF, effect sound stops
right when effect is turned off.
OFF, ON
SOFT ECHO
This echo has a soft tone.
This echo effect allows the use of modulation.
MOD Turns modulation ON or OFF. OFF, ON
TIME Sets the delay time. 19 - 581
REPEAT Adjusts the number of repeats. 0 - 100
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 - 100
WIDTH Adjusts the width of the modulation. 0 - 50
SPEED Sets modulation speed. 0 - 50
TAIL
When ON, effect sound continues even after effect is turned off. When OFF, effect sound stops
right when effect is turned off.
OFF, ON
DELAY