Zoom MS-70CDR+ - Modulation Effects Overview; Chorus Effect Types

2 3
CHORUS This effect moves the sound image cyclically left and right.
DEPTH Sets the depth of the modulation. 0 - 100
RATE Sets the speed of the modulation. 1 - 50
TONE Adjusts the tone. 0 - 10
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 - 100
VOL Adjusts the volume. 0 - 100
CLONE
CHORUS
This analog chorus sound models the Electro-Harmonix SmallClone.
DEPTH Sets the depth of the modulation. 1 - 2
RATE Sets the speed of the modulation. 0 - 100
TONE Adjusts the tone. 0 - 100
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 - 100
CHORUS ONE This models the sound of a BOSS CH-1 Super Chorus.
DEPTH Sets the depth of the modulation. 0 - 100
RATE Sets the speed of the modulation. 0 - 100
TONE Adjusts the tone. 0 - 100
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 - 100
OUTPUT
Sets output to mono or stereo. When stereo, effect sound is output from L channel and
unchanged input sound is output from R channel.
MONO,
STEREO
GREEN
CHORUS
This is a model of TC Electronics's CORONA CHORUS.
DEPTH Sets the depth of the modulation. 0 - 100
SPEED Sets the speed of the modulation. 0 - 100
TONE Adjusts the tone. 0 - 100
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 - 100
DRY
When ON, the original sound and the effect sound are mixed and output together. When OFF,
only the effect sound is output.
OFF, ON
TRI
CHORUS
This is a model of TC Electronics's CORONA Tri-Chorus.
DEPTH Sets the depth of the modulation. 0 - 100
SPEED Sets the speed of the modulation. 0 - 100
TONE Adjusts the tone. 0 - 100
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 - 100
DRY
When ON, the original sound and the effect sound are mixed and output together. When OFF,
only the effect sound is output.
OFF, ON
ANALOG
CHORUS
This effect simulates an analog chorus.
DEPTH Sets the depth of the modulation. 0 - 100
RATE Sets modulation speed. 0 - 100
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 - 100
LO Adjusts volume of low frequencies. 0 - 100
HI Adjusts volume of high frequencies. 0 - 100
OUTPUT
Sets output to mono or stereo. When stereo, effect sound is output from L channel and
unchanged input sound is output from R channel.
MONO,
STEREO
VINTAGE
CHORUS
This is a simulation of the BOSS CE-1.
COMP Sets the sensitivity of the compressor. 0 - 9
RATE Sets the speed of the modulation. 1 - 50
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 - 100
VOL Adjusts the volume. 0 - 100
MODULATION