Zoom MS-70CDR+ - Page 17

16 17
DYNAMIC
DELAY
This dynamic delay adjusts the volume of the effect sound according to the input signal
level.
TIME Sets the delay time. 1 - 2000
MODE
Sets the delay time range.
When metronome is chosen, the delay time is synchronized to the tempo.
Short,
Long,
REPEAT Adjusts the number of repeats. 0 - 100
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 - 100
SENSE Adjusts the effect sensitivity. -10 - 10
VOL Adjusts the volume. 0 - 100
TAIL
When ON, effect sound continues even after effect is turned off. When OFF, effect sound stops
right when effect is turned off.
OFF, ON
ICE DELAY This effect combines pitch shifting and delay.
INTVL Sets the pitch modulation amount for the audio slices.
-OCT -
2 OCT
TIME Sets the delay time. 60 - 1300
MODE
Sets the delay time range.
When metronome is chosen, the delay time is synchronized to the tempo.
Short,
Long,
REPEAT Adjusts the number of repeats. 0 - 100
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 - 100
BLEND Adjusts the balance between the dry and ICE signals. 0 - 20
SMEAR Adjusts the amount that the attack of the repeat sound is softened. OFF - 20
DAMP Adjusts how the repeat sound decays. 0 - 10
HPF Adjusts the maximum range of the frequencies in the effect sound. OFF - 900
SLICE Adjusts the length of the slices.
SHORT,
LONG
HOLD DELAY
This hold delay effect is controlled using the foot switch. When you press the foot switch,
the effect turns on, and when you release it, the effect sound is held.
TIME Sets the delay time. 1 - 4000
MODE
Sets the delay time range.
When metronome is chosen, the delay time is synchronized to the tempo.
Short,
Long,
REPEAT Adjusts the number of repeats. 0 - 100
HI-DMP Adjusts the treble attenuation of the delay sound. 0 - 10
TONE Adjusts the tone. 0 - 100
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 - 100
P-P Sets delay output to mono or Ping Pong. MONO, P-P
TAIL
When ON, effect sound continues even after effect is turned off. When OFF, effect sound stops
right when effect is turned off.
OFF, ON
TRIGGER
HOLD
DELAY
This delay samples and holds using picking as the trigger.
TIME Sets the delay time. 10 - 1000
MODE
Sets the delay time range.
When metronome is chosen, the delay time is synchronized to the tempo.
Short,
Long,
DUTY Sets the time that the sample-andhold sound is produced. 25 - 100
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 - 100
SENSE Adjusts the effect sensitivity. 0 - 30
VOL Adjusts the volume. 0 - 100
TAIL
When ON, effect sound continues even after effect is turned off. When OFF, effect sound stops
right when effect is turned off.
OFF, ON
DELAY