Zoom MS-70CDR+ - Page 9

8 9
HARMONY
PITCH
SHIFTER
This intelligent pitch shifter outputs the effect sound with the pitch shifted according to
scale and key settings.
SCALE Sets the pitch of the pitch-shifted sound added to the original sound.
-6 - 6
( See Table 1 )
KEY Sets the tonic (root) of the scale used for pitch shifting. C - B
TONE Adjusts the tone. 0 - 10
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 - 100
VOL Adjusts the volume. 0 - 100
POLYPHONIC
PITCH
SHIFTER
This pitch shifter supports chord playing.
SHIFT Adjusts the pitch shift amount in semitones. -24 - 24
TONE Adjusts the tone. 0 - 100
WET Adjust the amount of the effect sound in the mix. 0 - 100
DRY Adjust the amount of the original sound in the mix. 0 - 100
GEMINOS
DOUBLER
This effect allows you to obtain doubling tracking in real time.
TIGHT Adjusts the tightness of the doubling track king. 0 - 100
MODE Select Stereo / Mono and select the number of tracks.
MN-3, MN-2,
MN-1, ST-1,
ST-2, ST-3
WET Adjust the amount of the effect sound in the mix. 0 - 100
DRY ust the amount of the original sound in the mix. 0 - 100
RING
MODULATOR
This effect produces a metallic ringing sound. Adjusting the "Freq" parameter results in a
drastic change of sound character.
FREQ Sets the frequency of the modulation. 1 - 50
TONE Adjusts the tone. 0 - 10
BAL Adjusts the balance between original and effect sounds. 0 - 100
VOL Adjusts the volume. 0 - 100
SLICER This effect creates a rhythmical sound by continuously slicing the input.
PTTRN Sets effect pattern. 1 - 20
SPEED Sets the speed of the modulation. 1 - 50
THRSH Adjusts effect threshold. 0 - 50
BAL Adjusts the balance between original and effect sounds. 0 - 100
VOL Adjusts the volume. 0 - 100
MODULATION