8 9
DYNAMIC
FLANGER
The volume of the effect sound changes according to the input signal level with this
dynamic flanger.
SENSE Adjusts the sensitivity of the effect. -10 - 10
DEPTH Sets the depth of the modulation. 0 - 100
RATE Sets the speed of the modulation. 0 - 50
RESO Adjusts the intensity of the modulation resonance. -10 - 10
VOL Adjusts the volume. 0 - 100
VIBRATO This effect automatically adds vibrato.
DEPTH Sets the depth of the modulation. 0 - 100
RATE Sets the speed of the modulation. 0 - 50
TONE Adjusts the tone. 0 - 10
BAL Adjusts the balance between original and effect sounds. 0 - 100
VOL Adjusts the volume. 0 - 100
SWELL
VIBRATO
This effect modulates the pitch after picking.
DEPTH Sets the depth of the modulation. 0 - 100
SPEED Sets the speed of the modulation. 0 - 100
RISE Sets the time before the effect begins to modulate the pitch. 0 - 100
VOL Adjusts the volume. 0 - 100
OCTAVER This effect adds sound one octave and two octaves below the original sound.
OCT1 Adjusts the level of the sound one octave below the effect sound. 0 - 100
OCT2 Adjusts the level of the sound two octaves below the effect sound. 0 - 100
TONE Adjusts the tone. 0 - 10
DRY Adjusts the volume of the unaffected sound. 0 - 100
CHARA Adjusts effect character. 0 - 100
VOL Adjusts the volume. 0 - 100
BASS
OCTAVER
This effect adds sound one octave below the original sound.
OCT Adjusts the level of the one-octave lower sound component. 0 - 100
DRY Adjusts the volume of the unaffected sound. 0 - 100
LO Adjusts volume of low frequencies. 0 - 10
MID Adjusts volume of middle frequencies. 0 - 10
HI Adjusts volume of high frequencies. 0 - 10
VOL Adjusts the volume. 0 - 100
BASS
ANALOG
OCTAVER
This simulates an analog octaver. Modulation can be applied to the octave below, adding
depth to the sound.
OCT1 Adjusts the level of the sound one octave below the effect sound. 0 - 100
OCT2 Adjusts the level of the sound two octaves below the effect sound. 0 - 100
MOD Sets how much the octave below sound is modulated. 0 - 100
DRY Adjusts the volume of the unaffected sound. 0 - 100
POLYPHONIC
OCTAVER
This octaver supports chord playing.
LO Adjusts volume of low frequencies. 0 - 100
HI Adjusts volume of high frequencies. 0 - 100
WET Adjust the amount of the effect sound in the mix. 0 - 100
DRY Adjust the amount of the original sound in the mix. 0 - 100
MODULATION
To Next Page
Loading...
