Zoom R16 - Instrument Connections and Stereo Settings; Stereo Linking for Track Recording; Input Mapping and Status Key Usage; Microphone and Line Instrument Setup

10
Audio interface manual
3
Press the MASTER track status key
to cycle through the functions of
the individual track status keys.
By pressing a track status key, you can
toggle solo, mute and record enable on
and o for the corresponding track.
R16 level meters
(audio interface use)
Each level meter other
than the MASTER displays
the signal immediately
before sending it to the
computer.
The mastering level
meter displays the re
-
turning signal from the
computer.
Checking DAW recording levels
By setting “REC SIGNAL” to “WET” (signal with
eect)or “DRY”(no eect),youcan sendsignals
to the computer with or without being processed
bytheR16’sinserteects.
The recording levels of the sent signals are
displayed on the level meters. The signals shown
on the mastering level meter and each level meter
aredierent.
Please adjust the
level meter so
that it does not
light the red clip
indicator.
Red light
(clipping)
Each press of the
MASTER track key
changes the function in
mute>rec>solo order.
Sample Rate=48.0kHz
s:Solo