Zte Altair - Call Settings and Alerts

42 SETTINGS
• Alert Type: Set the ring type (e.g. ring, vibrate and ring).
• Receiver Volume: Set the volume of the receiver.
• Message Tone: Set the notication ringtone for an incoming SMS or
MMS message.
• Key Tone: Enable or disable keypad tones when dialing.
• Warning Tone: Turn the warning tone on or off.
• Power On/Off Tone: Turn on/off the sound that plays while powering on/
off the phone.
• Missed Calls Alert: Enable, disable, and set timing for the missed calls
audible notication.
Call settings
From the home screen, go to the Main menu > Settings > Call Settings.
Earphone Auto Answer: You can congure the phone to answer incoming
calls automatically when an earphone is connected to the phone.
Any Key to Mute: This option allows you to silence the ringtone by pressing
any key when there is an incoming call.
Connection Reminder: When a call connects, you will hear a three-tone
beep to notify you that the connection was successful.
Minute Reminder: When this setting is enabled, you will hear a short beep
every minute while a call is in progress. You will hear the rst beep after 50
seconds, then 1 minute 50 seconds, etc.
Send My Caller ID: This function allows you to prevent others from seeing your
phone number when making outbound calls.
Set by Network: The network chooses whether to show/hide your
phone number.