EasyManua.ls Logo

Zte Altair - HAC Mode

Zte Altair
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
55CARE AND MAINTENANCE
3. Enter the local emergency number for your current location (for example,
911).
4. Press the Send key to dial the number. Follow the instructions you receive
and do not end the call until told to do so.
When the SIM card is not inserted or when the Phone Lock function is
activated and you do not know the password, press the Left select key for
SOS and enter the emergency number for your location. Press the Send key
to dial the number.
Notes:
• Tell the operator which service you require: Police, Fire, or Ambulance.Tell 
them where you are and remain stationary to maintain contact if possible.
•  Due to the nature of the cellular system, emergency calls cannot be 
guaranteed. You should never rely solely on any wireless device in
emergency situations.
HAC mode
When HAC mode is active, your phone sends the audio signals from your
phone to the telecoil rather than to the microphone of your hearing aid.
The HAC setting only improves the quality of sound transmitted through the
earpiece; it does not affect the speakerphone or a headset.
•  It is recommended that you disable Bluetooth functionality when HAC
mode is in use.
•  HAC mode consumes additional battery power. Pay close attention to the 
battery’s charge level when using HAC mode.
Caution: Do not turn on the HAC setting unless you use a hearing aid with a 
telecoil. Using this setting without a hearing aid or with a hearing aid without 
a telecoil may be harmful to your hearing.

Table of Contents

Other manuals for Zte Altair

Related product manuals