Zte Altair - Removing the Sim Card; Inserting a Microsd Card

3GETTING STARTED
Removing the SIM card
1. Hold the Power/end key to power off the phone.
2. Remove the back cover and battery.
3. Gently remove the SIM card from the card slot.
Inserting a microSD
™
card
Note: This phone can support a memory card (not included) with a capacity
of up to 32 GB.
1. Hold the Power/end key to power off the phone.
2. Remove the back cover and battery.
3. Insert the microSD card carefully with the metal contacts facing downward
as shown. Make sure that the card is fully seated in the slot.
4. Reinsert the battery and replace the back cover.
Caution: Do not attempt to use memory cards other than microSD cards with
this phone. Attempting to use non-compatible memory cards might cause
loss of data or damage to the phone, and may void your Warranty.