1GETTING STARTED
Getting started
Note: In this user guide, “press a key” means to press the key and release it,
while “hold a key” means to press the key for at least two seconds and then
release it.
Phone setup
Removing the back cover and installing the battery
Note: If you do not plan to use the battery
for a long time, remove it from the phone
and store it in a cool, dry place.
1. Remove the back cover as shown.
2. Carefully insert the battery with the
contacts located against the metal springs.
3. Push down the battery until fully seated.
4. Replace the cover on the back of the phone.
Removing the battery
1. Hold the Power/end key to power off
the phone.
2. Remove the back cover.
3. Lift the end of the battery near the bottom
of the phone to remove it.
To Next Page
Loading...
