Zte Altair - Battery Charging

4 GETTING STARTED
Removing a microSD card
1. Hold the Power/end key to power off the phone.
2. Remove the back cover and battery.
3. Carefully slide the microSD card out of the slot.
Charging the battery
Note: For best performance, charge the battery fully prior to using the phone
for the rst time.
1. Open the charging port cover.
2. Insert the charger’s connector into the charging port. Be sure to insert
the connector in the correct orientation. Do not force the connector into
the port.
3. Plug the charger into a standard AC wall outlet.
4. When the battery is fully charged, unplug the charger and disconnect it
from the phone.