9
6. Follow the system prompts on your device to finish the setup.
Connecting via a Network Cable
Connect one of the LAN ports on the Smart Hub and the LAN port on your
computer with a LAN cable.
Accessing the 5G CPE Web Page
Visit the 5G CPE web page to configure the Smart Hub settings, such as
work mode, passwords, Wi-Fi SSID.
1. View the sticker at the base of the Smart Hub to get the default URL to
the web page and password.
2. Launch the Internet browser from a device connected to the Smart Hub
and enter the URL in the address bar to load the log in page as below.
To Next Page
Loading...
