38
• 2.4GHz SSID Switch: Enable or disable 2.4GHz SSID
function.
• Network Name (SSID): Service Set Identier (SSID).
Enter a string less than 32 characters as the name for
your wireless local area network (WLAN).
• Broadcast Network Name (SSID): Disable or Enable
(Default) this function. If Enable is selected, the device
broadcasts the SSID, and other devices can search
and connect to it. When you select Disable, other
devices cannot search out the SSID. If you want
someone to connect, you need to tell them the SSID,
and let them setup manually.
• AP Isolation: When Enabled is selected, each of your
wireless clients will not be able to communicate with
each other. When Disable is selected, each of your
wireless clients will be able to communicate with each
other.
• Security Mode: The security modes are described
below:
To Next Page
Loading...
