51
NOTE:
Filtering rules are matched one by one, if met this provision,
it will not continue to match the rules listed below.
Click Apply to conrm your conguration.
Click Delete to delete the rule which you selected.
To add a new rule:
1. Select Enable in the Port Filtering area.
2. Click Apply.
3. Input the detail information in the MAC/IP/Port
Filtering Settings area.
4. Click Apply in the MAC/IP/Port Filtering Settings
area.
Port Forwarding
You can set up virtual servers to provide services on the
Internet. Select Settings > Firewall > Port Forwarding,
the virtual server settings is shown in the following gure.
To Next Page
Loading...
