EasyManua.ls Logo

Zte MF275R - IC Compliance

Zte MF275R
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
70
The maxim permissible exposure is defined in 47 CFR
1.1310 with 1mW/cm2. The transmitter is using external
antenna that operate at 20cm or more from nearby
persons. The maxim power density is 0.041mW/cm2.
The FCC grant can be found under the Display Grant
section of http://www.fcc.gov/oet/fccid
after searching on FCC ID: SRQ-MF275R.
IC
This radio transmitter (identify the device by certification
number, or model number if Category II) has been
approved by Industry Canada to operate with the antenna
types listed below with the maximum permissible gain
and required antenna impedance for each antenna type
indicated. Antenna types not included in this list, having a
gain greater than the maximum gain indicated for that type,
are strictly prohibited for use with this device.
Immediately following the above notice, the manufacturer
shall provide a list of all antenna types approved for use
with the transmitter, indicating the maximum permission
antenna gain (in dBi) and required impedance for each.

Other manuals for Zte MF275R

Related product manuals