27
DMZ
The DMZ, or De-Militarized Zone, is a selected internal IP address of a device that allows full access and
connectivity from outside traffic, through the firewall, to a specific internal device without being filtered or
blocked by the MF279T.
DMZ Settings: You may choose to enable or disable the DMZ setting here. DMZ is set to Disable by
default.
DMZ IP Address: Enter the internal IP address of the desired device that will be directly accessible from
outside the firewall.
Update
This screen provides the ability to check new version and auto-check settings.
You can click "Check " to manually check for new software at any time.
Enable Auto-check Settings will set the device to automatically check for updates. You can change the
Auto-check Cycle to the desired update schedule. Disable Auto-check Settings will set the device to not
check for device updates automatically.
Others
You can customize your MF279T by other settings, such as restart and reset the device, PIN
management and set the device’s time manually or set the device to obtain time from an SNTP server
automatically.
Specifications
To Next Page
Loading...
Need help?
General
