Zte MF279T User Manual

30
(not dial tone) when
I try to place a call
Internet
Problem Possible Solution
Can't access
the Internet

Make sure your MF279T is powered on. Slide the ON/OFF button to the ON
position until the Power light stays solid green.

For Wi-Fi: Make sure your MF279T is located in the general area of your
Wi-Fi enabled device(s). Check that your device is connected to the MF279T
Wi-Fi network (e.g. ZTE MF279T/2.4GXXXX) and you are using the correct
Wi-Fi Password. For Ethernet: Make sure the Ethernet cable is securely
inserted into the Ethernet port on the back of the MF279T
and your computer
(or other device).

Move the MF279T to an area with sufficient network signal (Green or Blue
Signal Strength light).

Make sure the Wi-Fi light is on. If not, maybe in sleep mode. You can restart
your MF279T, press the WPS button or charging to wake up.

Check the following on the MF279T Manager (http://telus.ztesmarthub)
Download or
upload
speeds are
slow

Check your signal strength light. If not green or blue, choose an alternate
location.

Other connected devices may be transferring a large amount of data. To view
and block other connected devices, go to the MF279T Manager
(http://telus.ztesmarthub).

A phone call in progress may slow down the data speed.

Check your wireless network connection using the MF279T Manager
(http://telus.ztesmarthub). 4G LTE offers the fastest data speeds and if
available, the MF279T should be located in a covered area.
The MF279T
Network does
not appear in
the wireless
network list

Make sure the MF279T is powered on. Power light should be solid green/b
lue
if connected to a power outlet (or blinking green if on back-up battery).

Refresh the network list on the device you are trying to connect.

Restart your MF279T: Slide the ON/OFF button to the OFF position until all
lights turn off. Then, Slide the ON/OFF button to the ON position until the
power light stays solid green.
Can't connect
to my
MF279T
Home Base

Check that you are connecting to your MF279T Wi-Fi network name (SSID)
(e.g. ZTE MF279T/2.4GXXXX). If connected via Ethernet, make sure the
Ethernet cables are firmly attached.

Make sure you entered the correct Wi-Fi password found on the bottom of
your device or your customized password, if you changed it.

Zte MF279T Specifications

General

Category	Network Router
Model	MF279T
Connectivity	4G LTE, Wi-Fi
Wi-Fi Standards	802.11 b/g/n
Download Speed	Up to 150 Mbps
Upload Speed	Up to 50 Mbps
Antenna Ports	2 x SMA
Wi-Fi Frequency	2.4 GHz
LTE Category	4
SIM Slot	1 Micro SIM
Ethernet Ports	2 x RJ45
Antenna	2 x External