What to do if there is no dial tone on Zte Network Router?
If there is no dial tone, please wait for 1~2 minutes after the device is turned on. If the issue persists, it may be due to weak RF reception, so try changing the location of the device.
What to do if I cannot connect to Zte MF286D Wi-Fi?
If you cannot establish a Wi-Fi connection between your device and the Zte Network Router, ensure that the Wi-Fi function is active. Refresh the network list and select the correct SSID. Also, make sure you are typing the correct network key (Wi-Fi password) when you connect to the device.
What to do if I cannot access the Internet at all with my Zte MF286D?
If you cannot access the Internet, please check your configuration settings and network indicators. Also, allow 1~2 minutes for the device to initialize.
How to establish Wi-Fi connection between Zte MF286D Network Router and client?
To establish a Wi-Fi connection, make sure the Wi-Fi function is active. Refresh the network list and select the correct SSID. Check the IP address to ensure your client can automatically obtain one in the Internet protocol (TCP/IP) properties. Type the correct network key (Wi-Fi password) when you connect to the device.
What is the default password for Zte Network Router?
For the Wi-Fi connection password and the default password of the 4G CPE configuration web page, please check the label on the device. If you forgot new password, you need to restore the device to the factory default settings.
How to establish Wi-Fi connection with Zte MF286D Network Router?
If you cannot establish a Wi-Fi connection between your device and the client using your Zte Network Router, ensure that the Wi-Fi function is active. Also, refresh the network list and select the correct SSID. When you connect to the device, make sure you type the correct network key (Wi-Fi password).
What to do if I hear a rapid engaged tone when using Zte MF286D?
If you hear a rapid engaged tone as soon as you lift the phone off the hook, put the phone on the hook and try again.
What to do if I hear a prompt as soon as I lift the phone off the hook with Zte MF286D?
If you hear a prompt, phone alert, or announcement as soon as you lift the phone off the hook, make sure your (U)SIM card is inserted correctly and the PIN number has been entered. If you entered the PIN incorrectly, you will need to enter the PUK code when prompted.
How to fix slow download or upload speed on Zte MF286D Network Router?
If you are experiencing slow download or upload speeds, it might be due to the signal strength. Check your signal strength and network type.
Where can I find the password for my Zte Network Router?
For the Wi-Fi connection password, check the label on the device. The default password to the admin page is written on the label under your device (website password). If you changed the password and forgot the new password, you need to restore the device to the factory default settings.
General| Category | Network Router |
|---|---|
| Download Speed | 300 Mbps |
| Upload Speed | 50 Mbps |
| Wi-Fi Standards | 802.11 a/b/g/n/ac |
| Wi-Fi Frequency | 2.4 GHz & 5 GHz |
| Max. Users Supported | 64 |
| LAN Ports | 4 |
| Ethernet Ports | 4 |
| USB Ports | 1 |
| SIM Card Slot | Yes |
| External Antenna Ports | 2 |
| Weight | 500 g |
| Operating Temperature | 0°C to 40°C |
| Antenna | Internal & External |
| Wi-Fi Speed | Dual-band, 2.4 GHz: 300 Mbps, 5 GHz: 867 Mbps |
| Storage Temperature | -20°C to 70°C |
| Antennas | 2 |
| Chipset | Qualcomm |
| Ports | 4 x LAN, 1 x USB, 2 x External Antenna |
| Network Bands | B1/B3/B7/B8/B20/B28 |
| SIM Slot | 1 x Standard SIM |
To Next Page
