6 ZTE confidential
2.2 Test Web UI
1. Connect to MF286D by either of the following ways:
Connecting through LAN cable
Connect the LAN2, LAN3, LAN4 port of MF286D to the computer with the LAN
cable.
NOTE:
You need to set the IP address as Obtain an IP address automatically.
Connecting through Wi-Fi
a) Enable the Wi-Fi function on your computer, mobile phone or tablet.
b) Select the Wi-Fi hotspot name of MF286D (SSID).
c) Type the Wi-Fi password to connect to MF286D.
NOTE:
The default Wi-Fi SSID and password can be found on the bottom of MF286D.
2. Open the web UI.
a) Open the browser and visit the address 192.168.100.1 on the client to open the
web UI.
b) Type the management password to log in to the web UI.
NOTE:
Check the default management password on the bottom of the device.
3. Confirm each function is available, including Internet connection, settings, etc.
NOTE:
A vailid (U)SIM card is needed to access the Internet.
To Next Page
Loading...
