Zte MF29 - In Cable Broadband mode; In 4 G Gateway mode

40 41
You can change the administrator’s password. Click Apply to con-
rm your conguration.
Restore
Select Settings > Advanced > Restore, click Restore to set all the
settings to their factory default values, and then the device will re-
start automatically.
PIN Manage
Note: Pin Manage can be used in 4G Gateway mode.
Select Settings > Advanced > PIN Manage, the PIN manage is
shown in the following gure:
If you select Modify, the modication parameters are shown in the
following gure:
Type the old PIN code, and then type two times the new PIN code.
Click Apply to conrm your conguration.
Notes:
Consecutive inputting wrong PIN code for three times can cause
locking of UIM card. To unlock, you need PUK code.
PIN code and PUK code may be offered together with the UIM card.
If not, please contact with network operator. Please change default
PIN code to your own as soon as possible.
Router
Note: Router can be used in 4G Gateway mode and Cable Broad-
band mode.
Select Settings > Advanced > Router, the router information is
shown in the following gure:
• IP Address: IP address for LAN interface.
• Subnet Mask: Subnet mask for the IP address.
• MAC Address: MAC address for the LAN interface.
• DHCP Server: Enable or disable DHCP Server function.
• DHCP IP Pool: Allocate begin and end IP address for IP pool.
• DHCP Lease Time: Dene how long the leased IP address will
be expired, and will relocate new IP address.
Click Apply to conrm your conguration.
MF29T User Manual V1.1-0703.indd 40-41 2012-7-3 16:46:33