EasyManua.ls Logo

Zte MF29 - APN Setting; WAN Connection

Zte MF29
25 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
38 39
If you select Enable, the Virtual Server Settings will appear:
IP Address: Set IP address for the virtual server.
Port Range: Set port numbers for the virtual server.
Protocol: Set protocol for the virtual server.
Comment: Type comment for the virtual server settings.
Click Apply to conrm your conguration.
DMZ
You can setup a De-militarized Zone(DMZ) to separate internal net-
work with the Internet. Select Firewall > DMZ, the DMZ setting is
shown in the following gure:
If you select Enable, set the DMZ IP Address, and then click Apply
to conrm your conguration.
System Security
You can congure system rewall to protect AP or router from being
attacking. Select Firewall > System Security, the system security
setting is shown in the following gure:
Allow or Deny the remote management function, and then click
Apply.
Allow or Deny ping from WAN filter on requirement, and then
click Apply.
Advanced
Status
Select Settings > Advanced > Status, the system information is
shown in the following gure:
Management
Select Settings > Advanced > Management, the administrator set-
tings information is shown in the following gure:
MF29T User Manual V1.1-0703.indd 38-39 2012-7-3 16:46:33

Related product manuals