Confidential and Proprietary Information of ZTE CORPORATION 17
C h a p t e r 6
Surfing on the Internet
You can use the default configuration to access the Internet. If you want to change the settings,
please refer to the following introduction.
Set APN parameters
1. Select Connection → APN Settings to access the following figure:
2. Set the related parameter.
Parameter
Description
APN Setting
APN address mode. If a fixed APN is provided by your service
provider, select Manual APN. Otherwise select the Auto APN,
and the device will automatically obtain this parameter.
Profile
Selection
Choose the desired profile.
Profile Name
Enter the profile name.
APN
Access Point Name.
DNS
If a fixed IP address is given by your service provider, then choose
Manual DNS. Otherwise, choose Auto DNS, and device will
automatically obtain parameters.
To Next Page
Loading...
