12
Installing the nano-SIM Card and the
microSDHC™ Card
There is no need to power off the phone before installing or
removing the nano-SIM card.
The microSDHC card (optional, not included) can be installed and
removed while the phone is turned on. When the phone is on,
unmount the microSDHC card before removing it (see Using the
microSDHC Card as Portable or Device Storage).
WARNING!
To avoid damage to the phone, do not use any other kind of SIM
cards, or any non-standard nano-SIM card cut from a SIM card. You
can get a standard nano-SIM card from your service provider.
1. Place your finger into the slot at the bottom of the back cover,
and gently lift and remove the cover.
To Next Page
Loading...
Need help?
General
