21
• Select Apply.
• Reconnect your Wi-Fi devices, if necessary, using the new Wi-Fi credentials.
Configure Data Network Options
You can set WAN connection mode, and choose whether to allow the OBD2 device to be used
when roaming internationally, from the 4G Mobile Hotspot configuration page.
Log in as Administrator.
Select Settings > Network Settings.
Choose the appropriate option:
• To access the Internet in automatic or manual mode, select Automatic / Manual in
WAN Connection Mode Settings section, and select Apply.
• To enable / disable international roaming, check or uncheck the box under Automatic
in WAN Connection Mode Settings section, and select Apply.
To Next Page
Loading...
