Zte Z998 - Choosing Touch Input Settings

the right word.
To enable and use TouchPal Curve:
1. In the TouchPal keyboard screen, touch and check
Curve, and then touch Close.
2. Move your finger from letter to letter on the keyboard to
trace a word without lifting the finger until you reach the
end of the word.
NOTE: TouchPal Curve is only available in the Full
QWERTY layout.
Tips for using TouchPal Curve:
 Touch when you want to. If you want to enter a single letter,
go ahead and touch.
 Lift your finger at the end of the word. A space is added
automatically when you begin to trace the next word.
Choosing Touch Input Settings
Choose the touch input settings by touching the Menu Key >
Start of the word
End of the word