ZXHN H1600 Maintenance Management Guide
Figure 8-18 DSL line diagnosis Page
2. Select the Diagnosis Type and VPI/VCI.
3. Click Diagnosis. The result is displayed in the bottom box.
8.8 Check the ARP Table
Check the ARP address of the connected terminal device.
Steps
1. On the main page of the ZXHN H1600, select Management&Diagnosis > ARP Ta-
ble to the ARP Table page, see Figure 8-19.
Figure 8-19 ARP Table Page
2. Click Refresh button to refresh information.
8.9 Check the MAC Table
Check the MAC address of the connected terminal device.
8-14 SJ-20200218145027-006 | 2021-03-04(R1.0)
To Next Page
Loading...
