Zte ZXHN H1600 - Configure the DMZ

ZXHN H1600 Maintenance Management Guide
Figure 5-26 ALG Configuration Page
2. Select the ALG services.
3. Click Apply button to apply the changes.
Note
 Click All On to select all ALG services.
 Click All Off to cancel all ALG services.
5.4.5 Configure the DMZ
The section describes how to configure DMZ. DMZ provides the parameters of DMZ
configuration features.
Steps
1. On the main page of the ZXHN H1600, select Internet > Security > DMZ to the DMZ
page, the page see Figure 5-27.
Figure 5-27 DMZ Configuration Page
Table 5-17 lists the DMZ parameters.
5-30 SJ-20200218145027-006 | 2021-03-04(R1.0)