Zte ZXHN H1600 - Configure the DDNS

ZXHN H1600 Maintenance Management Guide
5.6 Configure the DDNS
The section describes how to configure DDNS. DDNS provides the parameters of DDNS
configuration function.
Steps
1. On the main page of the ZXHN H1600, select Internet > DDNS to the DDNS page,
see Figure 5-30.
Figure 5-30 DDNS Configuration Page
2. Configure the DDNS parameters.
Table 5-20 lists the DDNS parameters.
Table 5-20 Parameter Descriptions for the DDNS
Parameter Description
Provider Supported provider.
Options: DynDNS, DtDNS, No-IP, easyDNS, freedns and TZO.
If the DtDNS is selected, the WAN Connection should be configured.
DDNS DDNS Switch. Click On to enable the DDNS function.
Provider URL The URL of provider.
If the DynDNS HTTP is used, the URL is http://www.dyndns.com.
If the DtDNS HTTP is used, the URL is http://www.dtdns.org.
If the No-IP HTTP is used, the URL is http://www.no-ip.com.
If the easyDNS HTTP is used, the URL is http://www.easydns.com.
If the freedns HTTP is used, the URL is http://freedns.afraid.org.
If the TZO HTTP is used, the URL is http://www.tzo.com.
Username DDNS server user name.
Password DDNS server password.
Host name Host name corresponding to the user.
5-34 SJ-20200218145027-006 | 2021-03-04(R1.0)